Table of Contents
Advertisement
www.ti.com
8
Operation
This section details the operation of the bq20z60 EVSW software.
8.1
Starting the Program
Run bq20z60 EVSW from the Start | Programs | Texas Instruments | bq20z60 EVSW | menu sequence.
The SBS Data screen
button is clicked, or when the <Keep Scanning> check box is checked. To disable the scan feature,
deselect <Keep Scanning>.
The continuous scanning period can be set via the | Options | and | Set Scan Interval | menu selections.
The range for this interval is 0 ms to 65,535 ms. Only items that are selected for scanning are scanned
within this period.
The bq20z60 EVSW provides a logging function which logs the values that were last scanned by EVSW.
To enable this function, select the Start Logging button; this causes the Keep Scanning button to be
selected. When logging is Stopped, the keep scanning button is still selected and has to be manually
unchecked.
The logging intervals are specified under the | Options | menu with the maximum value of 65,535 ms. The
Log interval cannot be smaller than scan interval because this results in the same value being logged at
least twice.
SLUU354 – June 2009
Submit Documentation Feedback
(Figure
8) appears. Data begins to appear once the <Refresh> (single time scan)
bq20z60EVM-001 SBS 1.1 Impedance Track™ Technology
Enabled Battery Management Solution Evaluation Module
Operation
11
Advertisement
Table of Contents
