1.2.1
RTC Split Power
1.2.2
Global Reset
SPRU752B
RTC split power is available with reset mode 0 only. The RTC power domain
is split from the core power domain so that the real-time clock and its
associated oscillator can continue to run off of the battery while the MPU
subsystem is completely powered off. With RTC split power, PWRON_RESET
acts as a battery power-on reset while RTC_ON_OFF is used to subsequently
reset the MPU subsystem without disrupting the time stored in the RTC.
Table 3 summarizes sources and status bits for global resets. The table
groups some peripherals into general classes. Peripheral classes group
peripherals based on the source of the reset input. For example, a Class-1
module resets directly from the cold, power-on reset while a Class-2 peripheral
(module) resets from the MPU subsystem. See Figure 1 and Table 5 for more
information on peripheral classes.
Reset Architecture
Initialization
9