Command Accounting; Command Authorization - HP FlexFabric 7900 Series Command Reference Manual

******************************************************************************
<Sysname.41>
This operation is the same as directly logging in to the device at 192.168.1.41 through Telnet. When
you break the Telnet connection to 192.168.1.41, the Telnet connection to 192.168.1.40 is broken at
the same time.

command accounting

Use command accounting to enable command accounting.
Use undo command accounting to restore the default.
Syntax
command accounting
undo command accounting
Default
Command accounting is disabled. The accounting server does not record executed commands.
Views
User line view, user line class view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
When command accounting is enabled but command authorization is not, every executed command
is recorded on the HWTACACS server.
When both command accounting and command authorization are enabled, only authorized
commands that are executed are recorded on the HWTACACS server.
Invalid commands issued by users are not recorded.
If the command accounting command is configured in user line class view, command accounting is
enabled on all user lines in the class, and you cannot configure the undo command accounting
command in the view of a user line in the class.
Examples
# Enable command accounting for user line VTY 0.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] command accounting
Related commands
accounting command (Security Command Reference)

command authorization

command authorization
Use command authorization to enable command authorization.
Use undo command authorization to restore the default.
17