Command Authorization - HP 6125XLG Command Reference Manual

If the command accounting command is configured in user line class view, command accounting is
enabled on all user lines in the class, and you cannot configure the undo command accounting
command in the view of a user line in the class.
Examples
# Enable command accounting for user line VTY 0.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] command accounting
Related commands

command authorization

•
accounting command (Security Command Reference)
•
command authorization
Use command authorization to enable command authorization.
Use undo command authorization to restore the default.
Syntax
command authorization
undo command authorization
Default
Command authorization is disabled. Logged-in users can execute commands without authorization.
Views
User line view, user line class view
Predefined user roles
network-admin
Usage guidelines
When command authorization is enabled, a command is available only if the user has the
commensurate user role and is authorized to use the command by the AAA scheme.
If the command authorization command is configured in user line class view, command authorization is
enabled on all user lines in the class, and you cannot configure the undo command authorization
command in the view of a user line in the class.
Examples
# Enable command authorization for VTY 0 so a user logged in through VTY 0 can execute only
authorized commands that are permitted by the user role.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] command authorization
Related commands
command accounting
•
authorization command (Security Command Reference)
•
17