[Sysname-GigabitEthernet1/0/1] qos wfq 0 group 1 byte-count 10
qos wfq group sp
Syntax
qos wfq queue-id group sp
undo qos wfq queue-id group sp
View
Interface view
Default level
2: System level
Parameters
queue-id: Specifies a queue by its ID, which ranges from 0 to 7.
sp: Specifies strict priority (SP) queuing.
Description
Use qos wfq group sp to assign a queue to the strict priority (SP) group on an interface that performs
SP+WFQ queuing.
Use undo qos wfq group sp to remove a queue from the SP group on an interface that performs SP+WFQ
queuing.
This command is available only on a WFQ-enabled interface. Queues in the SP group are scheduled
with SP, instead of WFQ.
Related commands: display qos wfq interface and qos wfq.
Examples
# Enable WFQ on interface GigabitEthernet 1/0/1, and assign queue 0 to the SP group.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wfq
[Sysname-GigabitEthernet1/0/1] qos wfq 0 group sp
qos wfq weight
Syntax
qos wfq queue-id group 1 weight schedule-value
undo qos wfq queue-id group 1 weight
View
Interface view
Default level
2: System level
Parameters
queue-id: Specifies a queue by its ID, which ranges from 0 to 7.
83