Qos Pre-Classify - HP 5120 SI series Command Reference Manual

View
IPsec policy view
Default level
2: System level
Parameters
proposal-name&<1-6>: Name of the IPsec proposal, a string of 1 to 32 characters. &<1-6> means that
you can specify the proposal-name argument for up to six times.
Description
Use the proposal command to specify an IPsec proposal for the IPsec policy to reference.
Use the undo proposal command to remove an IPsec proposal reference by the IPsec policy .
By default, an IPsec policy references no IPsec proposal.
The IPsec proposals must already exist.
A manual IPsec policy can reference only one IPsec proposal. To replace a referenced IPsec proposal,
use the undo proposal command to remove the original proposal binding and then use the proposal
command to reconfigure one.
An IKE negotiated IPsec policy can reference up to six IPsec proposals. The IKE negotiation process will
search for and use the exactly matched proposal.
Related commands: ipsec proposal, ipsec policy (system view).
Examples
# Configure IPsec policy policy1 to reference IPsec proposal prop1.
<Sysname> system-view
[Sysname] ipsec proposal prop1
[Sysname-ipsec-proposal-prop1] quit
[Sysname] ipsec policy policy1 100 manual
[Sysname-ipsec-policy-manual-policy1-100] proposal prop1

qos pre-classify

Syntax
qos pre-classify
undo qos pre-classify
View
IPsec policy view
Default level
2: System level
Parameters
None
Description
Use the qos pre-classify command to enable packet information pre-extraction.
Use the undo qos pre-classify command to restore the default.
341