Replacing The Harness Eth Outlet With Cable - ABB Robotics OmniCore C90XT Product Manual

5.3.8 Replacing the harness ETH outlet with cable

Location
The illustration shows the location of the harness ETH outlet with cable.
xx1900001482
Required spare parts
Spare part
Harness ETH outlet with cable
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2020-2021 ABB. All rights reserved.
5.3.8 Replacing the harness ETH outlet with cable
Article number Note
3HAC070053-001
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
5 Repair
424.
Continues on next page
337