Replacing The Power Inlet - ABB Robotics OmniCore C90XT Product Manual

5.3.4 Replacing the power inlet

Location
The illustration shows the location of the power inlet in the controller.
xx1900001479
Required spare parts
Spare part
Harness AC input with SW
Connector AC power inlet
Handle for 6 mm switch
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2020-2021 ABB. All rights reserved.
5.3.4 Replacing the power inlet
Article number Note
3HAC067661-001 Harness-Mains connection
3HAC070308-001
3HAC037699-001
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
5 Repair
424.
Continues on next page
309