Inspection Activities; Inspection Of Controller - ABB Robotics OmniCore C90XT Product Manual

4 Maintenance

4.2.1 Inspection of controller

4.2 Inspection activities

4.2.1 Inspection of controller
Inspecting the OmniCore C90XT controller
1
2
3
4
5
162
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Inspect connectors and cabling to make
sure they are securely fastened and
cabling not damaged.
Inspect the fans and ventilation holes to
make sure they are clean.
After inspection: Temporarily turn the
power supply on. Inspect the fans to
make sure they function correctly. Switch
the power off.
© Copyright 2020-2021 ABB. All rights reserved.
Note/illustration
Location of wrist strap button:
xx1900001446
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E