ABB Robotics OmniCore C90XT Product Manual page 228

5 Repair
5.2.8 Replacing the main computer
Continued
3
Refitting the robot signal exchange proxy
1
Continues on next page
228
Action
Hook up the Ethernet extension switch
to the bracket and then push the switch
into position.
Note
During the installation, there should be
no gap between the upper surface of the
Ethernet extension switch and the lower
surface of highest bracket on the main
computer.
xx1800000972
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1800000493
xx1900001882
Note/Illustration
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E