ABB Robotics OmniCore C90XT Product Manual page 250

5 Repair
5.2.9 Replacing the power unit
Continued
2
Refitting the power unit
Refitting the power unit
1
Continues on next page
250
Action
Remove the screws and pull the power
unit out from the two snaps on the
mounting plate.
CAUTION
Only the sheet metal on the power unit
can be used for holding.
Do not touch the connectors or the filter
on the power unit.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1900001895
xx1900001896
Note/Illustration
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E