Overview Of This Manual - ABB Robotics OmniCore C90XT Product Manual

Overview of this manual

About this manual
This manual contains instructions for:
Usage
This manual should be used during:
Who should read this manual?
This manual is intended for:
Prerequisites
A maintenance/repair/installation craftsman working with an ABB robot must:
References
Document name
Product specification - OmniCore C line
Circuit diagram - OmniCore C90XT
Operating manual - RobotStudio
Operating manual - OmniCore
Operating manual - Integrator's guide OmniCore
Technical reference manual - System parameters
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
• mechanical and electrical installation of the controller
• maintenance of the controller
• mechanical and electrical repair of the controller
• installation and commissioning, from lifting the product to its work site and
securing it to the foundation, to making it ready for operation
• maintenance work
• repair work
• decommissioning work
Note
It is the responsibility of the integrator to conduct a hazard and risk analysis of
the final application and to ensure its safety.
It is the responsibility of the integrator to provide safety and user guides for the
robot system.
• installation personnel
• maintenance personnel
• repair personnel.
• be trained by ABB and have the required knowledge of mechanical and
electrical installation/repair/maintenance work.
• be trained to respond to emergencies or abnormal situations.
© Copyright 2020-2021 ABB. All rights reserved.
Overview of this manual
Document ID
3HAC065034-001
3HAC065464-009
3HAC032104-001
3HAC065036-001
3HAC065037-001
3HAC065041-001
Continues on next page
9