ABB Robotics OmniCore C90XT Product Manual page 126

3 Installation and commissioning
3.7.5 Installing the fieldbus adapter slave devices
Continued
Required documents
Document
Circuit diagram - OmniCore C90XT
Installing the fieldbus adapter slave variants
1
2
3
4
5
6
Continues on next page
126
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Open the door.
Remove the fieldbus slot cover with a
screwdriver.
Insert the fieldbus adapter slave and se-
cure the screws.
Close the door.
© Copyright 2020-2021 ABB. All rights reserved.
Article number Note
3HAC065464-009
Note/Illustration
Location of wrist strap button:
xx1900001446
Opening the door on page
xx1900001917
Closing the door on page
Product manual - OmniCore C90XT
180.
180.
3HAC073706-001 Revision: E