Safety Symbols On Controller Labels - ABB Robotics OmniCore C90XT Product Manual

1.2.2 Safety symbols on controller labels

Introduction to symbols
This section describes safety symbols used on labels (stickers) on the controller.
Symbols are used in combinations on the labels, describing each specific warning.
The descriptions in this section are generic, the labels can contain additional
information such as values.
Types of symbols
Both the manipulator and the controller are marked with symbols, containing
important information about the product. This is important for all personnel handling
the robot, for example during installation, service, or operation.
The safety labels are language independent, they only use graphics. See
on safety labels on page
The information labels can contain information in text.
Symbols on safety labels
Label
xx1400001152
xx2100000104
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Note
The symbols on the labels on the product must be observed. Additional symbols
added by the integrator must also be observed.
© Copyright 2020-2021 ABB. All rights reserved.
1.2.2 Safety symbols on controller labels
19.
Description
Read the user manual before use.
The robot is delivered to start in automatic mode
1 Safety
Symbols
Continues on next page
19