ABB Robotics OmniCore C90XT Product Manual page 258

5 Repair
5.2.10 Replacing the power supply
Continued
2
3
Refitting the DSQC 609 power supply
Refitting the power supply
1
2
Continues on next page
258
Action
Disconnect:
• T5.X1-AC Terminal block
• T5.X2-24V Terminal block
Remove the screw and the power supply.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1900001908
Note/Illustration
Location of wrist strap button:
xx1900001446
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E