ABB Robotics OmniCore C90XT Product Manual page 135

6
Refitting the robot signal exchange proxy
1
2
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Refit the cover on the main computer and
secure the screws.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.7.6 Installing the fieldbus master
Note/Illustration
Screws: Hexalobular socket pan head screw
M3x6 (4 pcs)
xx1800003418
Note
The Connected Services Gateway and Ether-
net extension switch are omitted on the illus-
tration to make it more clear.
Note/Illustration
Location of wrist strap button:
xx2000000419
Continues on next page
Continued
135