Replacing The Hmi Signal (Flexpendant) Connector - ABB Robotics OmniCore C90XT Product Manual

5.3.5 Replacing the HMI signal (FlexPendant) connector

Location
The illustration shows the location of the HMI signal connector in the controller.
xx1900001475
Required spare parts
Spare part
Harness TPU connection
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2020-2021 ABB. All rights reserved.
5.3.5 Replacing the HMI signal (FlexPendant) connector
Article number
3HAC069673-001
Article number
-
-
5 Repair
Note
Harness-TPU
Note
Content is defined in section
Standard toolkit for controller on
page 424.
Continues on next page
313