ABB Robotics OmniCore C90XT Product Manual page 305

Removing the fieldbus slot cover (baseline)
1
2
3
4
Refitting the fieldbus slot cover (baseline)
1
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
Open the door.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Remove the fieldbus slot cover with a
screwdriver.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
© Copyright 2020-2021 ABB. All rights reserved.
5.3.3 Replacing the fieldbus adapter slave
Note/Illustration
Opening the door on page
Location of wrist strap button:
xx1900001446
Note/Illustration
Continues on next page
5 Repair
Continued
180.
305