ABB Robotics OmniCore C90XT Product Manual page 147

5
6
Refitting the cable grommet assembly
1
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Route the cables through the cut-out.
Refit the cable entry frame to the enclos-
ure wall and secure with the screws.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.7.8 Installing the cable grommet assembly
Note/Illustration
xx1900002333
Screws: Torx pan head screw M4x8 (4 pcs)
Tightening torque: 1.5 Nm.
xx1900002332
Note/Illustration
Continues on next page
Continued
147