Installing Add-On Devices; Installing The Extension Box - ABB Robotics OmniCore C90XT Product Manual

3.8 Installing add-on devices

3.8.1 Installing the extension box

General
As an option an empty extension box can be purchased, to use for custom
equipment. The extension box can be installed on the basic box or anywhere else
as a standalone equipment.
xx1900001453
Required equipment
Equipment
Standard toolkit
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Note
Connect PE19 as grounding for the extension box in any use case.
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.8.1 Installing the extension box
Information
See Standard toolkit for controller on
page 424.
Continues on next page
151