ABB Robotics OmniCore C90XT Product Manual page 329

Spare part
Cable grommet asm
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore C90XT
Removing the cable grommet assembly
Preparations
1
2
3
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
Open the door.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
© Copyright 2020-2021 ABB. All rights reserved.
5.3.7 Replacing the cable grommet assembly
Article number Note
3HAC066396-001
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Article number Note
3HAC065464-009
Note/Illustration
Opening the door on page
Location of wrist strap button:
xx1900001446
5 Repair
Continued
424.
180.
Continues on next page
329