Installing The Ethernet Extension Switch - ABB Robotics OmniCore C90XT Product Manual

3 Installation and commissioning

3.7.3 Installing the Ethernet extension switch

3.7.3 Installing the Ethernet extension switch
Location
The illustration shows the location of the Ethernet extension switch in the controller.
xx1900001465
Required spare parts
Spare part
Ethernet Extension switch [3014-
1]
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Continues on next page
118
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2020-2021 ABB. All rights reserved.
Article number Note
3HAC059187-001 DSQC1035
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Product manual - OmniCore C90XT
424.
3HAC073706-001 Revision: E