ABB Robotics OmniCore C90XT Product Manual page 243

3
Refitting the robot signal exchange proxy
1
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Hook up the Ethernet extension switch
to the bracket and then push the switch
into position.
Note
During the installation, there should be
no gap between the upper surface of the
Ethernet extension switch and the lower
surface of highest bracket on the main
computer.
xx1800000972
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
© Copyright 2020-2021 ABB. All rights reserved.
5.2.8 Replacing the main computer
Note/Illustration
xx1900001888
xx1800000491
Note/Illustration
Continues on next page
5 Repair
Continued
243