Replacing The Main Computer - ABB Robotics OmniCore C90XT Product Manual

5.2.8 Replacing the main computer

Location
The illustration shows the location of the main computer in the controller.
xx1900001468
Required spare parts
Spare part
Main computer module assembly
Required tools and equipment
Equipment
Standard toolkit
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
Note
For robots with the controller delivered to start in automatic mode, a FlexPendant
is required after the replacement to be able to change to automatic mode.
© Copyright 2020-2021 ABB. All rights reserved.
5.2.8 Replacing the main computer
Article number Note
3HAC063061-001
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
5 Repair
424.
Continues on next page
219