ABB Robotics OmniCore C90XT Product Manual page 350

5 Repair
5.4.1 Replacing the power cable and power cable cover
Continued
Equipment
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore C90XT
Removing the power cable and power cable cover
1
2
3
4
Continues on next page
350
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Disconnect the FlexPendant from the
controller.
Remove the attachment screws for the
power cable cover.
Remove the power cable cover.
© Copyright 2020-2021 ABB. All rights reserved.
Article number Note
-
Article number Note
3HAC065464-009
Note/Illustration
xx1800001189
xx1800001190
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E