ABB Robotics OmniCore C90XT Product Manual page 287

2
Refitting the conveyor tracking module (option)
Refitting the conveyor tracking module (option)
1
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
5.2.13 Replacing the conveyor tracking module(CTM)
Action
Pull on the lower side of the conveyor
tracking module slightly and take out the
conveyor tracking module.
Note
The conveyor tracking module is secured
by the buckles.
Be careful with the direction of the
buckles when doing assembling/disas-
sembling work.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1900001912
xx1900001913
Note/Illustration
Continues on next page
5 Repair
Continued
287