ABB Robotics OmniCore C90XT Product Manual page 216

5 Repair
5.2.7 Replacing the scalable I/O unit
Continued
Removing the digital base (option)
1
2
Continues on next page
216
Action
Disconnect:
• K5.1.X5 - A2.X4/K4.X7
Note
If the Ethernet extension switch is
installed, connect and disconnect
the connector K5.1.X5 to/from
K4.X7.
If the Ethernet extension switch is
not installed, connect and discon-
nect the connector K5.1.X5 to/from
A2.X4.
• K5.1.X4 - K2.X3
• The harness connected to I/O unit
by customer
Push the buckle of the digital base
slightly and take out the digital base.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1900002446
xx1900002447
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E