Cleaning Activities; Cleaning Air Filter - ABB Robotics OmniCore C90XT Product Manual

4.3 Cleaning activities

4.3.1 Cleaning air filter

Location
The air filter is located as shown in the illustration below.
xx1900001473
Required equipment
Equipment
Cleaning agent
Compressed air
Cleaning
The procedure below details how to clean the moist dust filter.
1
2
3
4
5
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Remove the air filter.
If a fine filter is used, remove the polymeric
filter element first.
Clean the filter three or four times.
Allow the filter to dry in one of these ways:
• Lying flat on a flat surface
• Blow with compressed air in opposite
direction of filter airflow.
If a fine filter us used, refit a new polymeric
filter element to the filter.
© Copyright 2020-2021 ABB. All rights reserved.
4.3.1 Cleaning air filter
Note
Water 30-40°C with cleansing liquid or detergent.
Note/Illustration
How to remove the air filter is detailed
in section Replacing the air filter on
page 290.
Note
Do not wring the filter to press out water.
Continues on next page
4 Maintenance
163