ABB Robotics OmniCore C90XT Product Manual page 351

5
6
Refitting the power cable and power cable cover
1
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
5.4.1 Replacing the power cable and power cable cover
Action
Disconnect two connectors to the Flex-
Pendant.
Remove the power cable.
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1800001748
xx1800001192
Note/Illustration
Continues on next page
5 Repair
Continued
351