ABB Robotics OmniCore C90XT Product Manual page 354

5 Repair
5.4.2 Replacing the joystick protection
Continued
Removing the joystick protection
1
2
3
4
Refitting the joystick protection
1
Continues on next page
354
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Disconnect the FlexPendant from the
controller.
Remove the attachment screws.
Remove the joystick protection.
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1800001198
xx1800001199
Note/Illustration
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E