ABB Robotics OmniCore C90XT Product Manual page 307

4
Refitting the fieldbus adapter slave (option)
1
2
3
4
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Loosen the screws and take the fieldbus
adapter slave out.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Insert the fieldbus adapter slave tighten
the screws.
Close the door.
© Copyright 2020-2021 ABB. All rights reserved.
5.3.3 Replacing the fieldbus adapter slave
Note/Illustration
xx1900001917
Note/Illustration
xx1900001917
Closing the door on page
Continues on next page
5 Repair
Continued
180.
307