ABB Robotics OmniCore C90XT Product Manual page 260

5 Repair
5.2.10 Replacing the power supply
Continued
Removing the DSQC 634 power supply
Preparations
1
2
3
Removing the power supply
1
Continues on next page
260
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
Open the door.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Action
Remove the end clamp besides the
power supply with a screwdriver.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
Opening the door on page
Location of wrist strap button:
xx1900001446
Note/Illustration
xx1900002443
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
180.