Installing The Conveyor Tracking Module To Extension Box - ABB Robotics OmniCore C90XT Product Manual

3 Installation and commissioning

3.8.2 Installing the conveyor tracking module to extension box

3.8.2 Installing the conveyor tracking module to extension box
Overview
The conveyor tracking module uses network communication to share conveyor
speed and position data with one or more robot controllers. It contains a WAN port,
which is used to connect to the robot controllers and two LAN ports that can be
used for installation and service purposes.
xx1800000941
Required parts
Spare part
Conveyor tracking module [3103-
1]
CONNECTOR KIT - DSQC2000
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Continues on next page
156
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2020-2021 ABB. All rights reserved.
Article number Note
3HNA027579-001 DSQC2000
3HNA029345-001
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Product manual - OmniCore C90XT
424.
3HAC073706-001 Revision: E