ABB Robotics OmniCore C90XT Product Manual page 148

3 Installation and commissioning
3.7.8 Installing the cable grommet assembly
Continued
2
3
Concluding procedure
1
2
148
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Insert the cable grommet assembly into
the cover of the cabinet.
Secure it with the screws.
Action
Close the door.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx1900001446
Screws: Torx pan head screw M4x8 (4 pcs)
xx1900002340
Note/Illustration
Closing the door on page
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
180.