ABB Robotics OmniCore C90XT Product Manual page 112

3 Installation and commissioning
3.7.1 Installing the harness for double SMB
Continued
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore C90XT
Installing the harness double SMB
Preparations
1
2
3
Continues on next page
112
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
Open the door.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
© Copyright 2020-2021 ABB. All rights reserved.
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Article number Note
3HAC065464-009
Note/Illustration
Opening the door on page
Location of wrist strap button:
xx1900001446
Product manual - OmniCore C90XT
424.
180.
3HAC073706-001 Revision: E