ABB Robotics OmniCore C90XT Product Manual page 275

Removing the robot signal exchange proxy
1
2
3
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
Pull the cable ties out from the locking
holes.
Remove the screws and lift out the robot
signal exchange proxy.
© Copyright 2020-2021 ABB. All rights reserved.
5.2.12 Replacing the fieldbus master
Note/Illustration
Location of wrist strap button:
xx2000000419
xx1900001879
xx1900001880
Continues on next page
5 Repair
Continued
275