ABB Robotics OmniCore C90XT Product Manual page 201

4
Refitting the robot signal exchange proxy
Refitting the robot signal exchange proxy
1
2
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Remove the screws and lift out the robot
signal exchange proxy.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
© Copyright 2020-2021 ABB. All rights reserved.
5.2.4 Replacing the robot signal exchange proxy
Note/Illustration
xx1900001496
Note/Illustration
Location of wrist strap button:
xx1900001446
5 Repair
Continued
Continues on next page
201