Mounting The Flexpendant Holder - ABB Robotics OmniCore C90XT Product Manual

3 Installation and commissioning

3.4.2 Mounting the FlexPendant holder

3.4.2 Mounting the FlexPendant holder
Required equipment
Equipment
Standard toolkit
FlexPendant Holder w/t E-
stop cover
Continues on next page
58
Note
To avoid dropping the FlexPendant from height, the holder should be placed in
a comfortable working height.
Always use and store the FlexPendant in such a way that the cable does not
become a tripping hazard.
When not using the device, place it so it does not accidentally fall.
Note
The FlexPendant should always be placed in the holder when it is not used and
it is not allowed to use by unauthorized person.
© Copyright 2020-2021 ABB. All rights reserved.
Spare part number
3HAC064927-001
Product manual - OmniCore C90XT
Note
See Standard toolkit for con-
troller on page 424.
3HAC073706-001 Revision: E