ABB Robotics OmniCore C90XT Product Manual page 281

4
Refitting the main computer assembly to the cabinet
1
2
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Insert the cable ties into the locking
holes.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
© Copyright 2020-2021 ABB. All rights reserved.
5.2.12 Replacing the fieldbus master
Note/Illustration
xx1900001879
Note/Illustration
Location of wrist strap button:
xx1900001446
Continues on next page
5 Repair
Continued
281