ABB Robotics OmniCore C90XT Product Manual page 194

5 Repair
5.2.3.2 Replacing the heat exchanger
Continued
3
4
Refitting the heat exchanger
Refitting the heat exchanger
1
Continues on next page
194
Action
Remove the heat exchanger attachment
screws.
Take out the heat exchanger.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1900001493
Note/Illustration
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E