Table of Contents
Advertisement
3.5.5 Connecting power supply to and grounding the controller
Location of power supply connection
xx1900001479
Location of grounding point
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
3.5.5 Connecting power supply to and grounding the controller
Note
How to manufacture a cable with connector is described in section
connector on page
72.
DANGER
A residual current device (RCD) must be installed.
Note
The whole cabinet ground is connected to the X0.PE point.
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
Continues on next page
Fitting the
75
Advertisement
Table of Contents
Troubleshooting
