ABB Robotics OmniCore C90XT Product Manual page 145

Removing the slot cover (baseline)
1
2
Refitting the cable grommet assembly
Refitting the cables to the cable grommet assembly
1
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Remove the attachment screws.
Take out the cover from the inside of the
controller.
Action
Insert and equip the cable to the corres-
ponding KT grommet.
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.7.8 Installing the cable grommet assembly
Note/Illustration
xx1900002444
Note/Illustration
xx1900002337
Continues on next page
Continued
145