Replacing The Robot Signal Exchange Proxy - ABB Robotics OmniCore C90XT Product Manual

5 Repair

5.2.4 Replacing the robot signal exchange proxy

5.2.4 Replacing the robot signal exchange proxy
Location
The illustration shows the location of the robot signal exchange proxy in the
controller.
xx1900001464
Required spare parts
Spare part
Signal exchange
Harness Short-circuit connector
Harness 24_PC
Harness dual channel safety
Continues on next page
198
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2020-2021 ABB. All rights reserved.
Article number Note
3HAC064662-001 DSQC3037
3HAC065107-001 Mating connector for robot signal
exchange proxy.
3HAC064091-001 Harness K2.X2 - K4.X8, A2.X1
3HAC059273-001 Harness K2.X12 - K3.X6, K3.X7
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E