ABB Robotics OmniCore C90XT Product Manual page 333

Refitting the cable grommet assembly
Refitting the cables to the cable grommet assembly
1
2
3
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Insert and equip the cable to the corres-
ponding KT grommet.
Slide the grommets into the frame halves.
Note
It must be ensured that the flat side of
the grommets in the lower row are point-
ing to the open side of the frame half (flat
sides pointing upwards).
Note
The fl at side of the grommets in the up-
per row have to point downwards so that
all flat sides rest on each other. When
using single row frames the fl at side has
to point towards the cover strip.
Refit the cover strip onto the frame.
© Copyright 2020-2021 ABB. All rights reserved.
5.3.7 Replacing the cable grommet assembly
Note/Illustration
xx1900002337
xx1900002336
xx1900002335
Continues on next page
5 Repair
Continued
333