Replacing Parts On The Flexpendant; Replacing The Power Cable And Power Cable Cover - ABB Robotics OmniCore C90XT Product Manual

5.4 Replacing parts on the FlexPendant

5.4.1 Replacing the power cable and power cable cover

Location
The illustration shows the location of the power cable, power cable gasket, and
power cable cover in the FlexPendant.
xx1800001154
A
B
Required spare parts
Spare part
Harness TPU connection
Required tools and equipment
Equipment
Standard toolkit
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
A
Power cable cover
Power cable
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2020-2021 ABB. All rights reserved.
5.4.1 Replacing the power cable and power cable cover
Article number
3HAC069673-001
Article number
-
5 Repair
B
Note
Harness-TPU
Note
Content is defined in section
Standard toolkit for controller on
page 424.
Continues on next page
349