ABB Robotics OmniCore C90XT Product Manual page 131

3
i
Removing the robot signal exchange proxy
1
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Remove the assembly from the mounting
plate.
Note
Avoid colliding with the frame when re-
moving the unit.
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
For connected services gateway wired, there is no power cable.
Action
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.7.6 Installing the fieldbus master
Note/Illustration
xx1900001878
xx1900001885
Note/Illustration
Location of wrist strap button:
xx2000000419
Continues on next page
Continued
131