Replacing The Standard Fans - ABB Robotics OmniCore C90XT Product Manual

5 Repair
5.2.3.1.1 Replacing the standard fan

5.2.3.1 Replacing the standard fans

5.2.3.1.1 Replacing the standard fan
Removing the standard fan
Preparations
1
2
3
Removing the standard fan
1
2
Continues on next page
188
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
Open the door.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Action
Disconnect standard fan:
• G1.X2-K2.X17
Remove the fan bracket screws.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
Opening the door on page
Location of wrist strap button:
xx1900001446
Note/Illustration
xx1900001488
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
180.