ABB Robotics OmniCore C90XT Product Manual page 184

5 Repair
5.2.2 Replacing the axis computer
Continued
Removing the axis computer
1
2
Refitting the axis computer
Refitting the axis computer
1
Refitting the axis computer to the frame
1
Continues on next page
184
Action
Remove the bracket screws.
Remove the axis computer.
Action
Refit the axis computer to the bracket
and secure the screws.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1900001487
Note/Illustration
Screws: Torx pan head screw M4x8 (4 pcs)
xx1900001487
Note/Illustration
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E