ABB Robotics OmniCore C90XT Product Manual page 226

5 Repair
5.2.8 Replacing the main computer
Continued
2
3
Continues on next page
226
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Hook up the connected services gateway
to the bracket and push carefully into
position.
Note
During the installation, the gap between
the lower surface of the connected ser-
vices gateway and the upper surface of
the main computer should be zero.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx2000000419
xx1800000497
TOP VIEW
xx1900001884
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E