ABB Robotics OmniCore C90XT Product Manual page 280

5 Repair
5.2.12 Replacing the fieldbus master
Continued
Refitting the robot signal exchange proxy
1
2
3
Continues on next page
280
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Fit the robot signal exchange proxy and
secure the screws.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx2000000419
Screws: Torx pan head screw M4x8 (4 pcs)
xx1900001880
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E